Juniper EX3200 24P Layer 3 Switch for Highly Networked Businesses
The Juniper EX3200 24P Layer 3 Switch is truly an Ethernet fixed-configuration switch system designed for today’s widely networked companies. The EX3200 features complete Layer 2 and Layer 3 capabilities which aid hardware-based packet forwarding and very high capabilities packet switching and low latency.
Today’s top rated corporations require high capacity, and top speed multi-port Ethernet switches with high access through timezones. When a business enterprise is shopping around for that stand alone solution in access-layer expansions in remote workstations and campus networks, here’s a separate field functional approach to think about.
The Juniper EX3200 24P Layer 3 Switch comes equipped with four platform configurations and is a 24 port box with 10/100/1000 Mbit/s Ethernet ports that support either full or partial Power over Ethernet (PoE). The base 24 and 48-port EX3200 switches provide the full support to networked appliances like telephones, video cam and wireless LAN – WLAN – accessibility points. Full PoE in the switch will also support high-density IP telephony like VoIP. Power over Ethernet is an Ethernet cabling system that permits both data and electric power to pass safely using one cable. This Ethernet cabling system demands the utilisation of category 5 cable or better or Category 3 cable that could function with lower electricity. Updated PoE standard provides from 25.5 W to 51 W of power.
The Juniper EX3200 24P Layer 3 Switch has different 4-port GbE and 2-port 10GbE uplink modules with pluggable optics for high-speed connectivity to many other switches or upstream systems. This results in high data throughput capabilities yet low capital exposure for remote workgroup deployments.
The JUNOS operating-system helps ensure steady and steady control plane element execution considering the simplified single release train. The layer 3 switching handles high-performance LAN traffic smoothly. Utilizing its advanced packet forwarding potential, a Layer 3 switch device can be a cost-effective replacement for routers. The only real distinction between a Layer 3 switch and the router would be the physical management by your network owner through LCD panel.
Routers traditionally run on microprocessor to transfer packets of web data. Fixed configuration switches is less expensive than modular switches on an identical quantity of ports. The disadvantage of the fixed setup switches is they provide no configuration overall flexibility given that the wide variety of ports are fixed and cannot be converted. Some FCS, however, are stackable. Interconnecting quite a few switches increase port volume, though the most of switches that could be loaded is dictated by its manufacturing company.
For power supply serviceability, Juniper EX3200 24P Layer 3 Switch is field replaceable and fan tray lowers MTTR. The EX3200 switch is usually a maintained platform that supports a variety of attributes, enhances high access and network access control (NAC). NAC or Unified Access Control in Juniper, enables the button to rely upon access regulations than firewalls, VPN gateways produced by different vendors.
Juniper EX3200 24P Layer 3 Switch Ethernet switch is certified with Internet Protocol (IP) telephony technological innovation from Avaya. The Juniper EX3200 24P Layer 3 Switch are probably the five categories of Juniper EX series switches which can be also interoperable to many other network system operations platforms from AlterPoint, EMC, CA, HP, InfoVista, IBM and SolarWinds.